Richard Parke
Richard Parke
< Back to My Blog

How to Safely Power Your Household Gadgets

September 8, 2015 1:46 am

Overloaded circuits and improper power cord use at home are hazards that should be eliminated, according to the Electrical Safety Foundation International (ESFI). The ESFI recommends the following tips for homeowners:

• Be sure you are not overloading the circuit. Know the capacity of the circuit and the power requirements of all the electrical items plugged into the power strip and into all the other outlets on the circuit, as well as the light fixtures on the circuit.

• A heavy reliance power strip is an indication that you have too few outlets to address your needs. Have additional outlets installed where you need them.

• Understand that surge suppressors only protect the items plugged into it, not back along the circuit into which it is connected.

• Multiple plug outlets must be plugged directly into mounted electrical receptacles; they cannot be chained together.

• Ensure that all power strips and extension cords are certified by a nationally recognized testing laboratory such as UL, CSA, or ETL, and read the manufacturer’s instructions carefully.

• Extension cords should only be used on a temporary basis. Unplug and safely store them after every use.

• Do not place power cords and extension cords in high traffic areas or under carpets, rugs or furniture, and never nail or staple them to the wall or baseboard.

• Never remove the ground pin (the third prong) to make a three-prong plug fit a two-prong outlet.

• Make sure extension cords are properly rated for their intended use, indoor or outdoor, and meet or exceed the power needs of the appliance or tool being used.

• All electrical items and extension cords should be kept in good condition. If damage is discovered, repair the item or dispose of it.

Source: ESFI

Published with permission from RISMedia.

Facebook